Waste tire recycling and processing production line, introduction of waste tire crushing and recycli

Time:0000-00-00 00:00:00 Author:Suny Group

The working principle of the waste tire recycling production line. The waste tire recycling production line is also called the waste tire crushing recycling line and the waste tire rubber powder recycling line. The waste tire recycling production line is composed of various types of heavy equipment. It can realize the fully automated separation of car tires, truck tires, engineering vehicle tires and the recycling of rubber, steel wire and fiber materials among waste rubber products. And according to the actual needs of customers, the rubber raw materials can be cut and milled. The waste tire recycling production line runs at room temperature without any chemical additives and will not cause secondary pollution to the environment.

Automatic Tyre Recycling Machine

Supporting equipment for waste tire recycling production line:

It is composed of double-shaft crusher, material return system, dish screen, steel wire separator, vibrating screen, sorting machine, iron remover, cyclone separator, pulse dust removal system, electric control box system and other equipment.

For pre-crushing, the dual-shaft crusher has the characteristics of low speed and high torque, which can pre-shred waste tires into 50-300mm pieces without removing the tire rim.

Return material system: The return material system consists of a conveyor belt and a disc sorter. After being processed by the shredder, the fragments are transported to the disc sorter, and the appropriate size fragments will be screened out and transported to the wire separator for further Processing, the oversized fragments will be transported back to the shredder machine for processing again.

Secondary crushing: The steel wire separator is equipped with a serrated blade shaft, which has a strong shredding ability, which can further shred tires and separate steel wires.

Steel wire separator: The steel wire and tire rubber processed by the steel wire separator are completely separated. The steel wire is picked out from the rubber by a straddle magnetic separator. High-strength magnetic attraction combined with wear-resistant material belts makes the separation of steel wire and rubber nearly perfect.

Double-shaft crusher crushing: The double-shaft crusher is equipped with a unique design to the knife roller, which is conducive to the further crushing of tire rubber. The open design facilitates heat dissipation of the machine and reduces dust. The size of the rubber can be controlled by replacing the screen.

Rubber size sorting: The vibrating screen can mirror different sizes of rubber, and the larger rubber particles are sent back to the biaxial crusher for further crushing. The rubber of suitable size is screened by vibration, and the larger rubber particles are sent back to the biaxial crusher for further crushing. The rubber of suitable size is passed through the vibrating screen and sent to the separator to separate some fibers.

Separating fiber: The sorting machine can separate the fiber material in the proud particles. A magnetic separator is equipped under the separator to separate the residual steel wire to ensure the purity of the rubber particles. The system is connected with a pulse device to remove dust at the same time during the sorting process.

Dust removal device: The central dust removal device collects the dust and fibers generated during the tire wire crushing process through the air pipe.

Electric control cabinet: The electric control cabinet is equipped to automate the tire line operation, and the touch screen operation makes the programming, maintenance and overhaul of the whole line convenient.


If you have any requirement or suggestion, please fill in the form and send to us, thanks! | Whatsapp:+8613674945231