NewsHome>>News

How to maintain and maintain the folding mask machine?

Time:0000-00-00 00:00:00 Author:Suny Group

In the process of producing masks, the maintenance of the all-in-one mask machine is very important. The integrated maintenance of the mask machine can not only delay the decline of the accuracy of the mask machine, but also reduce the possibility of maintenance of the mask machine equipment.

Fully Automatic Mask Making Machine 1+1

1. Maintenance of appearance

Masks are tools that we wear on our faces, and some even need to enter the operating room. Therefore, the production of masks must require cleaning the mask machine every day. After turning off the power every day, staff need to be organized to clean the working surface of the equipment and the plates with masks. Be careful not to use water or oil, you can use alcohol and other non-toxic and volatile cleaning fluids.

2. Maintenance of the ultrasound system

Check whether the ultrasonic system (consisting of ultrasonic electric box, ultrasonic transducer, welding head and connecting wire) is clean, especially the ultrasonic electric box, ultrasonic transducer (sensing element) and welding head (mold) need to be cleaned without water. Whether the connecting wire is firm. Frequently check the degree of wear of the ultrasonic welding head (mold) of the folding mask machine. Check carefully whether the pointers of the voltmeter and ammeter on the ultrasonic electric box are normal.

3. Maintenance of the transmission system

The transmission system includes electric motors, gears, reducers, sprockets, chains, conveyor belts and other components. Check whether there is dust on the surface of the motor that affects heat dissipation. Whether the gears and sprockets are oiled or fixed. Is the chain tightness suitable, is there any foreign matter? Are the connecting screws of each transmission part loose? Is the lubricating oil of the reducer sufficient? Usually, the lubricating oil must be replaced every 1000 hours to 1500 hours.

4. Maintenance of electrical system

Check whether the circuit connector of the mask machine is loose, whether the main power line, branch signal line, etc. are worn out? Aging? Loose? Is the electric box clean and monotonous, and whether the exhaust fan works normally?

5. Maintenance of pneumatic system

Pneumatic system is composed of air source filter system, air pipe and air cylinder. Check whether there is water in the air filter? (Water discharge from the air compressor: In areas with high humidity, the air compressor should be discharged every day). Check if the air pipe is leaking? Is the cylinder leaking? Is the direction and operation of the cylinder magnetic sensor sensor normal.

Folding mask machine equipment should not be in contact with corrosive liquids and objects. For example, sweat can easily rust the equipment parts. If the equipment is not used for a long time, please apply anti-rust oil on the rusty parts of the transmission system and the mask machine.

Mask manufacturers require the necessary maintenance of the folding mask machine equipment, which can not only reduce the number of maintenance of the mask machine, but also increase the service life of the mask machine and increase the company's production capacity.

CONTACT US:

If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231

Name*:
Country:
E-mail*:
TEL:
Message*: