Characteristics and principles of lithium battery crushing and recycling equipment

Time:0000-00-00 00:00:00 Author:Suny Group

The lithium battery crushing and recycling equipment separates the waste lithium batteries into the raw materials we need by separating and regenerating the waste lithium batteries. The lithium battery recycling processing equipment uses the multi-knife crushing of the raw materials to crush and crush the raw materials, and the air flow sorting facility Carry out separation treatment, and have pulse dust removal facilities to collect dust generated during the separation process and subsequent processes. A green, high-quality closed-circuit cycle system for the full life cycle of the battery is formed. The lithium battery crushing and recycling equipment mainly uses the aluminum and copper in the anode and cathode sheets of the scrap lithium battery to separate the anode and cathode materials for recycling. The industry development environment is optimized, and the development prospects for the utilization of lithium batteries are considerable.

Lithium Battery recycling plant

1. Shredder: shred the lithium battery

2. Hammer crusher: the shredded materials are subjected to secondary crushing and separation

3. Crusher: crush the crushed materials

4. Analysis machine: the crushed materials are separated by winnowing

5. Collector: collect and discharge the dust passing through the induced draft fan

6. Pulse purifier (air purifier): Purify the dust of the whole set of equipment.

7. Grading screen: screen the materials sorted by the analyzer, and sort out large metal materials

8. Magnetic separator: separate nickel from metal

9. Specific gravity sorting machine: the fine materials that have passed through the sorting screen are then subjected to specific gravity sorting to separate the metal

10. Fan: Put the whole system in a negative pressure state, collect powder and purify the air.


1. Systematization, technical support, and high degree of automation.

2. Comes with dust removal equipment to avoid pollution.

3. The separated metal is clean, and the obtained material has high purity.

4. Reasonable design and easy maintenance.


If you have any requirement or suggestion, please fill in the form and send to us, thanks! | Whatsapp:+8613674945231