E waste recycling plant

TV & PC Disassembly Machine

  • Product Introduction:

Here the waste TV, computer and monitor sets are primarily disassembled into major parts, among which metal parts, plastic parts, CRT and PCB are dismantled directly by intelligent conveying and manual work with our new advanced technology. 

Video Description:

  • Product Description:

    Here the waste TV, computer and monitor sets are primarily disassembled into major parts, among which metal parts, plastic parts, CRT and PCB are dismantled directly by intelligent conveying and manual work with our new advanced technology. This is very important in the process of e-waste recycling.

    Composition:

    TV/Computer Monitor Disassembly Line consists of 9 roller conveyors, 26 cross-ball work table, a lighting set, a pallets loop-back device and 26 pallets.

    Working Process:

    At the beginning of the line, the roller conveyor carries TV/Monitor sets to cross ball work tables. Then operators will remove the back cover which is mainly made by plastic and reusable. After that, do the deflection coil disassembly which has copper around it. And then recycle different kinds of metals after disassembled PCB. Above removed parts are collected and classified respectively. Those who need further processing will be sent to next recycling station. And the empty pallets are automatically sent back to the beginning for next-time using through pallets loop-back device.

     

    Working Process

    Features:

    1. Dismantles waste TVs and monitors for recycling with advanced disassembly technology;

    2. Optimal combination of intelligent conveying and manual disassembly;

    3. Low power consumption and high efficiency, up to 100pcs per hour;

    4. Low malfunction rate, low maintenance cost, and extremely long service life;

    5. Can be used with CRT separator and glass washing machine;

    6. Comply with environmental requirements in most countries of use;

    7. NO waste gas, no waste water, no dust pollution.

    Environmental Compliance:

    Compliant with Emission Standard of Air pollutants: GB16297-1996

    Compliant with Noise Control Design of Industrial Enterprises: GB12348—2008

    Technical Parameter:

    Note : Processing capacities are the average value, depending on the capacity, the number of stand-alone units is different, Please inquire according to your needs.

    OptionSpecification
    Size26400×3240×2100 (mm) Or per request
    StationsNumber of stations per request
    CapacityDepends on number of operators
    Air Pressure0.6-0.8Mpa
    Power380v/22.5kw or 220v/0.48kw adapt to voltage of all countries

CONTACT US:

If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231

Name*:
Country:
E-mail*:
TEL:
Message*: