NewsHome>>News

How to maintain the folding mask machine

Time:0000-00-00 00:00:00 Author:Suny Group

In the process of producing masks from the folding mask machine, the maintenance of the all-in-one mask machine is very important. The maintenance of the all-in-one mask machine can not only delay the speed of the reduction of the accuracy of the mask machine, but also reduce the chance of repairing the mask machine equipment.

Fully Automatic Mask Making Machine 1+1

1. Appearance: The mask machine is used by us to wear on the face. Some even use it in the operating room. The production of the mask requires the mask machine to clean it every day. It is possible to arrange staff to clean the work surface of the equipment and the plates containing the masks after the power is turned off every day at the end of work. Be careful not to use water or oil. You can use other non-toxic and volatile cleaning fluids such as alcohol.

2. Ultrasonic system: (consisting of ultrasonic electric box, ultrasonic transducer, welding head, connecting wire) check whether the ultrasonic system is clean, especially the ultrasonic electric box, ultrasonic transducer (vibrator), welding head (mold) It is necessary to monotonously clean without water, and the connection line is not strong. Frequently check the degree of wear of the ultrasonic welding head (mold) of the folding mask machine. Check carefully whether the pointers of the voltmeter and ammeter on the ultrasonic electric box are normal.

3. Transmission system:

The drive system of the folding mask machine includes motors, gears, reducers, sprockets, chains, conveyor belts and other components. Check whether there is dust on the surface of the motor that affects heat dissipation, and whether the gears and sprockets are oiled or have attachments. Is the tightness of the chain suitable? Is there any foreign matter? Is the connecting screw of each transmission part loose? Is the lubricating oil of the reducer enough? Usually, the lubricating oil needs to be replaced once every 1000 hours to 1500 hours.

4. Electrical system:

Fold the mask machine to check whether the circuit connectors of the mask machine are loose, whether the main power line, branch signal line, etc. are worn? Aging? Loose? Is the inside of the electric box clean and monotonous? Is the exhaust fan working normally?

Five: Pneumatic system: (consisting of air source filter system, air pipe, cylinder) Is there water in the air filter check? (Air compressor water discharge: areas with high humidity should be watered to the air compressor every day). Check whether the air pipe is leaking? Is there any air leak in the cylinder? Is the cylinder magnetic sensor orientation and working properly.

Others: The equipment must not come into contact with corrosive liquids and objects. For example, sweat simply causes rusting of equipment parts. If the equipment is not used for a long time, apply anti-rust oil to the transmission system and rust-prone parts of the mask machine.

The mask manufacturer maintains the folding mask machine equipment according to the above requirements. It can not only reduce the number of repairs of the mask integrated machine, but also increase the working life of the mask machine, thereby providing the company's production power.

CONTACT US:

If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231

Name*:
Country:
E-mail*:
TEL:
Message*: