Features and maintenance rules of four-side sealing wet tissue packaging machine?

With the continuous development of science, the continuous progress of society, the continuous progress and maturity of science and technology, domestic packaging machinery is also constantly improving. The four-side sealing wet tissue packaging machine is a new equipment for packaging wet tissues. Compared with other silk tissue packaging machines, the specific introduction is as follows:

1. The four-side sealing wet tissue packaging machine is equipped with a hole punching die and a cover sheet bonding device.

2. The four-side sealing wet tissue packaging machine is equipped with a heat-sealing cutter head speed adjustable device. A knife has multiple functions, which greatly improves the production efficiency and reduces the production cost.

3. The four-side sealing wet tissue packaging machine uses a more advanced computer program to make the marking fast and accurate.

4. Each heating part adopts different temperature controllers to automatically control the temperature, and the sealing quality is high.

5. The suction port of the four-side sealing wet tissue packaging machine is firmly bonded, has good sealing performance, and is easy to open.

The four-side sealing wet tissue packaging machine is convenient to use, and the machine must be maintained frequently, otherwise the machine will be damaged if it runs for a long time. So how do we maintain and maintain the four-side sealing wet wipe packaging machine to make it play a good packaging effect?

First of all, when operating the four-side sealing wet tissue packaging machine, the equipment must be operated accurately. In order to facilitate the maintenance of the equipment, the staff must have the skills to use the instrument and simple troubleshooting capabilities. When performing maintenance, observe the following points:

1. Regularly check the screws and other parts of each part of the four-side sealing wet tissue packaging machine to prevent the screws from loosening and affecting the service life of the machine. When closed, the two heat seals should be in the open position.

2. The four-side sealing wet tissue packaging machine should be placed in a dry place. Pay attention to the waterproof, moisture-proof, anti-corrosion and rat-proof of the electrical parts. The electrical control box and terminals must be kept clean to prevent electrical failure.

3. The joints of the gears and rollers of the four-side seal wet tissue packaging machine, the oil holes of the bearings with seats, and the movable parts should be regularly oiled for lubrication.

Recommend products

>>More

Solar Panel Recycling Plant

Lithium Battery recycling plant

Copper Electrolysis Machine

E Waste Recycling Plant

Large Cable Wire Recycling Machine

Lead Smelting Cupola Furnace