Scrap lithium battery recycling production line

Time:0000-00-00 00:00:00 Author:Suny Group

Lithium battery recycling is mainly processed through a kind of waste lithium battery crushing and recycling equipment of Henan Jufeng Environmental Protection. The waste lithium battery crushing and recycling equipment increases the pretreatment link before the recycling of lithium battery raw materials, and adopts more advanced technology to extract Various elements in waste lithium batteries, including nickel, cobalt, manganese, copper, aluminum, etc. The equipment process production line reduces subsequent pollution while obtaining high-value recycled materials and increasing economic value. Therefore, the recycling of waste lithium batteries The use is of great significance.

Lithium Battery recycling plant

Lithium batteries are mainly composed of a shell, a positive electrode, a negative electrode, an electrolyte and a separator. The positive electrode is constructed by coating lithium cobalt oxide powder on both sides of the aluminum foil current collector through PVDF which has a binding effect; the negative electrode structure is similar to the positive electrode, and is composed of carbon powder bonded on both sides of the copper foil current collector. At present, research on the recycling of waste lithium batteries is mainly focused on the recovery of the valuable cathode precious metals cobalt and lithium. The copper in the anode of waste lithium batteries (with a content of about 35%) is a widely used important production raw material that adheres to The carbon powder on it can be used as additives for plastics and rubber. Therefore, the effective separation of the negative electrode constituent materials of the waste lithium battery has a driving effect on the realization of the limited recycling of the waste lithium battery and the elimination of its corresponding environmental impact.

The scrap lithium battery is sent to the primary shredder by the conveyor for shredding, and the shredded materials are sent to the secondary multi-blade crusher through the conveyor for the second crushing, and the materials after the secondary crushing enter the conveying The machine is equipped with magnetic separation equipment at the same time, which can separate the iron in the material. The sorted materials are sent to the air sorting machine through the conveyor. Separate the separator paper from the positive and negative electrodes by the induced draft fan and the cyclone feeder, and enter the separated positive and negative plates into a three-stage pulverizer for fine pulverization, and pulverize the material to about 20 mesh. The crushed materials enter the cyclone separator through the negative pressure system for dust filtration.

Through two airflow sorting, the materials of different densities are stratified, and then the positive and negative materials, copper, aluminum, nickel and other materials are obtained, and all the ultra-fine dust is brought into the pulse dust collector by the negative pressure system for collection. The filtered tail gas will continue to be sent from the negative pressure system to the tail gas treatment equipment for air purification, so that it can reach the environmental protection emission standard before being discharged at high altitude.


If you have any requirement or suggestion, please fill in the form and send to us, thanks! | Whatsapp:+8613674945231