Maintenance Measures for Metal Shredders

Different seasons of metal shredder maintenance measures are different, especially in the cold winter, because the temperature is too low, in order to allow the metal shredder to smoothly through the cold winter, the corresponding maintenance measures should be taken before winter The metal shredder should be thoroughly and thoroughly inspected to make the equipment safe for the winter. Here, we will explain the maintenance measures of the metal shredder by Zhengyang Machinery.

First, the replacement and selection of metal shredder lubricants is very important in this respect, because if the equipment is not lubricated, the lubrication performance of the lubricant will be reduced, which will have a certain impact on the normal operation of the metal shredder. And even damage the device. Therefore, the replacement of lubricating oil is very important. If it is a cold winter, the lubricating oil used in winter should be used.

Second, the metal shredder's circuit system inspection is also a maintenance measure, so usually pay attention to check the distribution cabinet motor wiring, check and adjust the electrolyte density, maintain the motor, increase the motor charging voltage, avoid the temperature in winter Low and short circuit, open circuit, affecting the normal production of equipment;

Third, the metal shredder bearing cleaning work is also the most important point, we all know that the metal shredder work environment is relatively harsh, especially the dust pollution will make the equipment adhere to a lot of powder, plus the metal shredder in the operation When the oil stains will splash out, after a long time, a lot of sludge will be stained on the metal shredder equipment. Therefore, in the cleaning process, it is also possible to find the damage of various devices and components and the leakage of oil, and do the preliminary work for the next maintenance. It is strictly forbidden to use high-pressure and high-temperature water guns to rinse the parts with high waterproof requirements, especially the electrical parts, so as not to cause damage.

Recommend products

>>More

Solar Panel Recycling Plant

Lithium Battery recycling plant

Copper Electrolysis Machine

E Waste Recycling Plant

Large Cable Wire Recycling Machine

Lead Smelting Cupola Furnace