Features of metal aluminum powder copper briquetting machine
The aluminum chip briquetting machine is mainly used to directly cold-press aluminum sawdust and aluminum turning chips into cylindrical cakes of 1-4 kg through high pressure. The whole process does not require heating, additives, or other processes to facilitate storage and transportation. and reduce losses during recycling. It is suitable for aluminum alloy profile factory, steel casting factory, aluminum casting factory, copper casting factory, auto parts, hardware and other foundry related enterprises. This series of equipment is classified into two types: large-tonnage vertical type and small-tonnage horizontal type.
Features of metal aluminum powder briquetting machine:
1. The system is designed with a preload relief device, which completely eliminates the hydraulic shock.
2. Advanced fast device to ensure the production needs of users.
3. The electrical part adopts imported PLC automatic control system, which has strong anti-interference ability and low failure rate.
4. The body adopts the overall steel structure, which has high strength and good stability, and does not need to install anchor screws.
5. The machine adopts hydraulic transmission, highly professional integral valve block, and large flow diameter, which reduces the pressure loss of the system and eliminates the drawback of leakage.
6. The use of cartridge valve, electro-hydraulic proportional valve and unique oil circuit design make the hydraulic system perfect. Even if it works under long-term heavy load, the system will not be powerless.
In addition, the vertical briquetting machine developed and produced by SUNY GROUP is a popularized model that is widely used today, with a large design tonnage, large output and a wide range of applications; while the traditional horizontal model is placed horizontally due to the main cylinder, and the seals are affected by gravity. Due to the influence of the effect, after the design pressure increases, the unbalanced force of the seal will cause large local wear, and the service life will be greatly reduced, which cannot meet the requirements of long-term continuous use of large output, and more small tonnage models are used (the design pressure should not exceed 2000KN), The scope of application is small.
Recommend products
CONTACT US:
If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231
