Mobile:0086-13283840926 E-mail:sunymachine@gmail.com
    


Zhengyang Machinery Alibaba Facebook Twitter Linkedin Youtube

Phone:+86-371-86617456

Mobile:+86-13283840926

Skype:harbin0229

E-mail:sunymachine@gmail.com

Name:
Country:
E-mail:
Tel:
Project:
Time:
IP:
Message:
NewsHome > News >

Mask Mking Machine Technical Parameters and Installation

Time:2020-09-12 11:41 Author:Suny Group

After using for a period of time, the Cable Wire Recycling Machine equipment may fail due to lack of regular maintenance. If there is any failure, it is time to find the cause and solve it. The motor plays an indispensable role in the Cable Wire Recycling Machine, so if the motor fails, it may cause the Cable Wire Recycling Machine to fail to work normally, so below, let’s take a look at the reasons and solutions for the abnormal sound of the Cable Wire Recycling Machine:

Fully Automatic Mask Manufacturing Making Machine

Cause 1: The voltage is too low.

Solution: Check and repair the circuit. The cable must meet the requirements and ensure that the voltage is around 380V.

Cause 2: Uneven blanking.

Solution: Evenly discharging, not too much or too little at a time, too much will block the crushing cavity, too little will waste resources and affect efficiency.

Fault reason 3: There is a problem with the motor or the bearing of the Cable Wire Recycling Machine.

Solution: stop first. Then repair and replace the motor or crusher bearing.

I hope that the above reasons and solutions for the abnormal sound of the Cable Wire Recycling Machine motor can help everyone, and I hope everyone can strictly follow the usage method, so if the customer wants to buy the equipment, you need to get in touch with the manufacturer.

Tags:

 

CONTACT US:

If you have any requirement or suggestion, please fill in the form and send to us, or contact us by E-mail:sunymachine@gmail.com,thanks!

Name:
Country:
E-mail:
TEL:
Project:
Time:
Message: