Method for manufacturing waste wire stripping machine
At present, in the recycling and dismantling industry of waste wires and cables, some use manual cutting, some use incineration, and some use special wire stripping equipment to dismantle waste wires and cables. Regardless of whether it is manual cutting or incineration, the efficiency is very low. Moreover, when waste wires and cables are incinerated, it will cause serious pollution to the environment. However, the structure of the existing wire stripping machine is relatively complicated, which is not conducive to the operation and maintenance of the operator. For this reason, we propose a wire stripping machine for waste wires.
The purpose of the present invention is to provide a solution to solve the above-mentioned background art problems.
In order to achieve the above objective, the present invention provides the following technical solutions: a waste wire stripping machine, including a frame, a first shell and a second shell are arranged above the frame, and a second shell is arranged below the frame There is a bottom plate, the upper surface of the bottom plate is fixed with a motor by bolts, the first housing and the second housing are connected by threads, and a peeling device is provided inside the first housing, and the peeling device includes A through hole, the inner cavity of the through hole is provided with a wire stripping blade, the second housing includes an upper housing and a lower housing, the left and right side walls of the upper housing are provided with upper grooves, the The upper shell and the lower shell are fixedly connected by bolts, the left and right side walls of the lower shell and the corresponding positions of the upper groove are provided with lower grooves, and the front side wall of the lower shell is provided with inlet lines The rear side wall of the lower casing is provided with an outlet hole, a lower introduction groove is arranged between the inlet hole and the outlet hole, and an introduction shaft is arranged between the upper groove and the lower groove. The shaft is connected to the motor through a chain.
Preferably, the through hole is oval, and the four end points of the oval are provided with stripping blades.
Preferably, the edge shape of the end of the through hole close to the outlet hole is rounded.
Preferably, the diameter of each group of wire inlet and outlet holes is different.
Preferably, the outer surface of the introduction shaft is provided with an upper introduction groove corresponding to the lower introduction groove, and the outer surface of the upper introduction groove is provided with protrusions.
Preferably, the cross section of the upper lead-in groove and the lower lead-in groove when used in combination is an ellipse.
Compared with the prior art, the beneficial effect of the utility model is: a waste wire stripping machine, through the extrusion of the upper and lower introduction slots, the cross-sectional shape of the wire to be stripped can be extruded into an oval shape, and then passed through the oval shape. The through hole increases the stability of the wire during the wire stripping process, and makes the wire stripping more accurate. By having stripping blades at the top, bottom, left and right ends of the through hole, the protective cover on the wire can be cut into The four parts are thus completely separated from the wires, making it convenient for workers to draw out the wires, saving time and manpower, and improving production efficiency.
Recommend products
CONTACT US:
If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231
