How to maintain and maintain the folding mask machine?
In today's society, due to the continuous deterioration of the natural environment and the increasing awareness of people's protection, the market demand for disposable medical masks and protective masks continues to expand. Many customers are keenly aware of this business opportunity and hope to participate in the mask production industry. However, in view of the unfamiliarity with the mask production process, the purchase of mask raw materials, the selection of mask machine manufacturers, the planning of the mask production workshop, the industry standards for mask production, etc., when inquiring about and consulting relevant information and making relevant budgets, Looks very blind and confused.
In the process of producing masks, the maintenance of the mask integrated machine is very important. The integrated maintenance of the mask machine can not only delay the decline of the accuracy of the mask machine, but also reduce the possibility of maintenance of the mask machine equipment.
1. Maintenance of appearance
Masks are tools we wear on our faces, and some even need to enter the operating room. Therefore, the production of masks must require cleaning the mask machine every day. After turning off the power every day, staff need to be organized to clean the working surface of the equipment and the plates with masks. Be careful not to use water or oil, you can use alcohol and other non-toxic and volatile cleaning fluids.
2. Maintenance of the ultrasound system
Check whether the ultrasonic system (consisting of ultrasonic electric box, ultrasonic transducer, welding head and connecting wire) is clean, especially the ultrasonic electric box, ultrasonic transducer (sensing element) and welding head (mold) need to be cleaned without water. Whether the connecting wire is firm. Frequently check the degree of wear of the ultrasonic welding head (mold) of the folding mask machine. Check carefully whether the pointers of the voltmeter and ammeter on the ultrasonic electric box are normal.
3. Maintenance of the transmission system
The transmission system includes electric motors, gears, reducers, sprockets, chains, conveyor belts and other components. Check whether there is dust on the surface of the motor that affects heat dissipation. Whether the gears and sprockets are oiled or fixed. Is the chain tightness suitable, is there any foreign matter? Are the connecting screws of each transmission part loose? Is the lubricating oil of the reducer enough? Usually, the lubricating oil must be changed every 1000 hours to 1500 hours.
4. Maintenance of electrical system
Check whether the circuit connector of the mask machine is loose, whether the main power cord, branch signal line, etc. are worn out? Aging? Loose? Is the electric box clean and monotonous? Is the exhaust fan working normally?
5. Maintenance of pneumatic system
Pneumatic system is composed of air source filter system, air pipe and cylinder. Check whether there is water in the air filter? (Water discharge from the air compressor: In areas with high humidity, the air compressor should be discharged every day). Check whether the air pipe is leaking? Is the cylinder leaking? Is the cylinder magnetic sensor's direction and working properly.
Folding mask machine equipment should not be in contact with corrosive liquids and objects. For example, sweat can easily rust the equipment parts. If the equipment is not used for a long time, please apply anti-rust oil on the rusty parts of the transmission system and mask machine.
Mask manufacturers require the necessary maintenance of the folding mask machine equipment, which can not only reduce the number of maintenance of the mask machine, but also increase the service life of the mask machine and increase the company's production capacity.
Recommend products
CONTACT US:
If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231
