Mobile:0086-13283840926 E-mail:sunymachine@gmail.com
    


Zhengyang Machinery Alibaba Facebook Twitter Linkedin Youtube

Phone:+86-371-86617456

Mobile:+86-13283840926

Skype:harbin0229

E-mail:sunymachine@gmail.com

Name:
Country:
E-mail:
Tel:
Project:
Time:
IP:
Message:
NewsHome > News >

How to troubleshoot common faults in the process of using Cable Wire Recycling Machine

Time:2021-02-26 10:33 Author:Suny Group

The Cable Wire Recycling Machine will inevitably fail after working for a long time. Don't worry if there is a failure, you should rationally understand the failure research and treatment methods. It is caused by raw materials, voltage, working time, improper operation, etc. So when the miscellaneous wire Cable Wire Recycling Machine fails, how should we solve it? Let's learn about the troubleshooting methods of common faults in the Cable Wire Recycling Machine at work.

Cable Wire Recycling Machine

1. The blockage of the wire crushing equipment is one of the common faults in the use of the Cable Wire Recycling Machine, which is caused by improper use and operation.

1. The feeding speed is fast, and the load increases causing blockage. In this case, stop immediately, open the machine cavity to clean up the material and then start the machine. Change the feeding method to feed at a constant speed, and do not feed more or less suddenly. Since the speed of the shredding equipment is about 750 rpm, the load is also large, and the load fluctuates strongly, so the current when the equipment is working is generally controlled at about 85% of the rated current.

2. Broken blades, aging, broken meshes at the bottom of the screen, and high oil content in the smashed miscellaneous wires will block the wire shredder. The broken and seriously aging blades should be updated regularly, the wire shredder should be kept in good working condition, and the bottom screen of the screen should be checked regularly to prevent oily miscellaneous wires, so that the wire shredder will not be blocked, increase the production efficiency, and strengthen the wire shredder Reliability and safety of work.

2. Most of the Cable Wire Recycling Machine uses a motor V-belt to connect the main shaft pulley of the wire shredder. This connection method is simple and easy to maintain. However, the overall vibration of the miscellaneous wire Cable Wire Recycling Machine sometimes occurs during use.

1. The anchor bolts of the wire shredder system on the Cable Wire Recycling Machine are loose or the foundation is not strong. The anchor bolts must be evenly tightened (or directly welded to the equipment base) during installation or maintenance. A shock absorber should be installed between the pulverizers to reduce vibration.

2. Rotary slices are broken or there are hard debris in the crushing cavity, which will also cause the unbalanced rotation of the rotary cutter frame, which will cause the whole machine to vibrate. Therefore, the equipment should be checked regularly, and the severely worn blades should be replaced. , The abnormal sound that occurs during the operation of the wire shredder should be shut down immediately for inspection and processing.

3. The connection between the specific gravity sorting bed system and other equipment is not consistent. For example, the improper connection of the feed conveyor and the dust removal link pipe will cause vibration and noise. Therefore, these connecting parts should not be hard-connected, and soft-connected are easy to use.

Third, the bearing is overheated

1. The bearing is an important part of the miscellaneous wire Cable Wire Recycling Machine. Its performance directly affects the normal operation and production efficiency of the equipment. During the operation of the equipment, the user should pay special attention to the heating of the bearing and the noise of the bearing part. Abnormalities should be early deal with.

2. Too much, too little or aging lubricating oil in the bearing is also the main reason for bearing damage due to overheating. Therefore, the lubricating oil should be filled in time and quantitatively according to the requirements of the instruction manual. Generally, the lubricating oil accounts for 70%-80 of the bearing space. %, too much or too little is not conducive to bearing lubrication and heat transfer and prolong its service life.

Tags:

 

CONTACT US:

If you have any requirement or suggestion, please fill in the form and send to us, or contact us by E-mail:sunymachine@gmail.com,thanks!

Name:
Country:
E-mail:
TEL:
Project:
Time:
Message: