Zhengyang Machinery Alibaba Facebook Twitter Linkedin Youtube




NewsHome > News >

Daily maintenance of small automatic surgical mask making machine

Time:2021-03-29 11:10 Author:Suny Group

Fully Automatic Mask Making Machine 1+1

1. Pneumatic system:

The air filter cup of the mask machine equipment needs to check whether there is water discharge, and the air compressor should be discharged by the way. In areas with high humidity, the air compressor should be discharged every day to check whether all air pipes and cylinders are leaking. The orientation of the magnetic anti-sensor and whether it is operating normally.

2. Ultrasonic system

Check whether the ultrasonic mask machine system is kept clean, especially the ultrasonic electric box, vibrator (transducer), welding head must be dry and clean without water, the connection line must be firm, and often check the wear of the ultrasonic welding head Degree, pay attention to observe the change scale of the voltmeter and ammeter pointer on the ultrasonic electric box.

3. Transmission system

The transmission system includes motors, gears, reducers, sprockets, chains, conveyor belts and other parts. We need to check whether there are dust and other things attached to the motor that affect heat dissipation, and whether the gears and sprockets are oiled. If there are attachments, they should be cleaned. Clean, is the chain tightness appropriate, whether there is any foreign matter that has not been cleaned, whether the connecting screws between the transmission parts are loose, and the lubricating oil of the reducer is not enough, usually the machine needs to be replaced once in 1000-1500 hours .

Four, electrical system

Check whether the connector of the mask machine equipment circuit is loose, whether the main power cord, branch signal line, etc. are worn and aging, whether the electrical equipment is loose, whether the electrical box maintains a dry environment, and the exhaust fan is Not a normal job etc.

Five, appearance

Masks are used to wear on the face, and medical masks need to enter the operating room. Therefore, the production of masks must require the cleanliness of the mask machine equipment. Every day after get off work, it is necessary to arrange for personnel to shut down the mask machine equipment after the power is turned off. Clean the work surface and the plate containing the mask. Note that it cannot be cleaned with water. Clean the equipment with a non-toxic and volatile cleaning fluid such as alcohol.

Six, anti-rust

The equipment should not be stuck with corrosive liquids and objects. Sweat is very easy to cause the equipment parts to rust. If the equipment does not operate for a long time, you need to apply anti-rust oil to the transmission system of the mask and the rust-prone parts.

The above is some maintenance knowledge of the equipment provided by the Xintaiming flat face mask machine manufacturer. As long as the maintenance and maintenance of the flat face mask machine are done every day, it can greatly improve the life of the face mask machine and reduce the probability of maintenance, which will bring more Interests.




If you have any requirement or suggestion, please fill in the form and send to us, or contact us by,thanks!