Name:
Country:
E-mail:
Tel:
Project:
Time:
IP:
Message:
NewsHome > News >

Matters needing attention in daily maintenance and maintenance of wet tissue machine

Time:2021-04-12 11:12 Author:Suny Group

Portable Wet Wipes Making Machine

(1) The wet wipe machine should be operated on a dry, tidy, and firm horizontal table, and a distance of at least 10 cm from the edge of the table should be maintained.

(2) Before connecting the wet tissue machine with 220V (mains power), please check whether the voltage marked on the product is consistent with the local voltage.

(3) It is strictly forbidden for children to touch the machine without adult supervision.

(4) When the wet tissue machine is not used for a long time, please unplug the power cord from the power socket to avoid bad effects caused by misoperation.

(5) When moving the wet tissue machine, try to move the machine forward as much as possible, not upside down, so as to avoid the water remaining in the machine from spilling out and scalding the human body.

(6) When cleaning the machine, do not rinse or soak the machine directly.

(7) The wet tissue machine has not been used for a long time. When using it again, please clean the inside of the machine thoroughly with hot water before using it.

(8) If the machine has quality problems that you cannot solve, please contact customer service or go to the specified service station for maintenance. Please do not disassemble and repair the machine privately to avoid the risk of electric leakage or electric shock.

(9) Please do not move the body during the operation of the machine, and do not disassemble or assemble parts during operation.

(10) Please do not subject this product to severe impact or fall.

(11) During the production of wet wipes, please do not cover the heat dissipation holes.

(12) When disassembling the machine for cleaning or maintenance, first unplug the power cord from the power socket.

(13) During the operation of the machine, do not put your hands or other hard objects into the body, and make sure that the machine is placed on a level surface.

(14) When installing the machine after cleaning or maintenance, be sure to install the mixing box, residue box, filter screen, protective cover, wet wipe tray and cleaning plate in place, and buckle the upper cover and the pressure rod firmly.

(15) During the process of making wet wipes, please do not touch the emergency switch of the mask tray on the side. After making the wet wipes, the film tray will automatically pop out without manual operation. This switch is used when there is a malfunction or maintenance, and it is necessary to manually open the wet wipe tray.

(16) If the power is suddenly cut off after pressing the start button, after the power is turned on, add pure water to the water injection port until the indicator light turns red, then stop adding water, and press the start button, the machine will restart to heat the wet wipes process. If the power is off for too long, it is recommended not to use this wet wipe.

Tags:

 

CONTACT US:

If you have any requirement or suggestion, please fill in the form and send to us, or contact us by E-mail:sunymachine@gmail.com,thanks!

Name:
Country:
E-mail:
TEL:
Project:
Time:
Message: