Radiator crushing machine
Manual dismantling of the radiator has low efficiency and high cost. The radiator crushing and sorting production line adopts mechanical crushing processing, and then uses air-flow sorting technology to separate copper and aluminum, which is energy-saving and environmentally friendly, high output, and good sorting effect, which is favored by customers.
Dry-type waste water tank radiator separation, disassembly and recycling equipment, including a first broken conveying device, a double-shaft shredder, a second broken conveying device, a hammer crusher, a sorting conveying device, a vibrating air flow sorting device, and a cyclone aluminum dust collection device , Pulse dust removal device, power distribution cabinet and air compressor, the first-breaking conveying device, double-shaft shredder, second-breaking conveying device, hammer crusher, sorting conveying device, vibrating air flow sorting device, cyclone aluminum gathering The dust removal device and the pulse dust removal device are connected and operated in a sequence. The air compressor is connected to the cyclone aluminum dust removal device and the pulse dust removal device. The power distribution cabinet is electrically connected to various working components and controlled by PLC. By adding auxiliary devices and the conveying links of the cyclone feeding device to make the separation of raw materials more detailed and reasonable structure design, the problem of recycling of metal resources in wires and cables and waste disposal has been effectively solved, and the automation strength is high, the separation is complete, and the recycling High-quality equipment saves labor during use, improves production efficiency and reduces environmental pollution, which is conducive to environmental protection.
Production line characteristics
1. This production line has been researched by our company for many years and combined with the actual situation at home and abroad. Compared with similar production lines at home and abroad, the processing flow has lower metal loss, reduces the number of crushing, and separates the materials in the state, thereby reducing metal powder To improve recycling efficiency.
2. The primary crushing adopts a double-shaft shredder and adopts a two-shaft pair-roller design, which has low noise and large torque, which can crush larger radiators.
2. The vertical crusher has strong crushing ability. It can easily crush the water tank materials in one-time crushing. It does not need to remove iron in advance. The hammer is made of alloy material and has a service life of more than one year.
3. The degree of automation is high, and only 2-3 staff are needed for the whole line.
4. The sorting adopts two-stage specific gravity sorting to improve the sorting accuracy, and the purity of the sorted copper, iron, and aluminum is >99%.
5. The treatment process is equipped with a dust collection system, which effectively controls the overflow of dust.
The waste radiator is sent to the double-shaft shredder via the conveyor for primary crushing. The double-shaft shredder squeezes, tears, and breaks the radiator into small pieces, and then sends it to the vertical crusher via the conveyor for primary crushing. For secondary crushing, the vertical crusher fully dissociates the radiator fragments, and squeezes and kneads them into high-density pellets. The crushed small particles are separated from the iron in the material by the magnetic separator, and the remaining copper And the aluminum enters the specific gravity separator for fine sorting, and the remaining copper and aluminum are sorted out.
Recommend products
CONTACT US:
If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231
