How to choose a 4 side seal wet towel machine?
4 side seal wet towel machine introduction: Fully automatic adjustable wet tissue packaging machine is suitable for producing all kinds of four-side sealing wet tissues, makeup remover wipes, personal care wipes, alcohol business cards, etc. One machine can produce a variety of different packaging sizes. Wet wipes products. This machine is a combination of our company's international advanced packaging equipment, adopting optical-electrical integrated design, PLC centralized control, advanced equipment technology, stable performance, simple operation, beautiful packaging, and continuous air pressure sealing to ensure the tightness of the product.
Machine features:
1. Adjustable mold design to realize the production of wet wipes with different packaging sizes in one machine.
2. The four-side-sealed wet wipes are packaged in a single piece to make the product more high-end.
3. The metering pump imported from Japan is used, and the filling volume is accurate to 0.01ml.
4. Touch screen + PLC operation, temperature, speed and wet wipe length can be adjusted freely.
5. The key parts of the machine adopt well-known brands to ensure the stability and service life of the machine.
6. Servo motor controls key actions to improve the accuracy and stability of the machine.
Maintenance operation of the 4 side seal wet towel machine:
1. Preliminary preparation
Before you start using the machine, you must first determine what kind of material you want to use, check whether the machine circuit can operate normally, and check whether there are any small debris on the machine. If it needs to be cleaned up in time, ensure that the machine is kept clean. The state of dust, and remember to sterilize the four-side seal wet tissue packaging machine, and configure the liquid pot according to the requirements of the product.
2. Start working
After confirming that there is no one next to the machine, stand in a safe area, then turn on the circuit breaker and power on the machine. Don’t worry when you get here, because the materials we added won’t find a place in the machine by ourselves, we need us Artificially place non-woven fabric (spunlace) and other materials on the corresponding roll rack, pull the material out, fold it, spray water, and pull it to the fold to be rolled by the folding wheel, and then roll the film, pull it, etc. The material is placed on the corresponding roll rack and positioned, then you can turn on the main switch and water supply switch of the four-side seal wet tissue packaging machine, adjust the system speed, and we can proceed to our normal production.
3. Emergency
In case of emergency, the machine needs to be suspended or the machine needs to be suspended for other reasons, you can refer to the following operations:
Stop the machine normally, press the main switch, turn off the water supply switch, turn off the speed control switch, and cut off the power supply.
If it is an emergency, such as a personal hazard, it is recommended to press the main switch immediately to stop the machine.
How to choose a 4 side seal wet towel machine? First of all, according to your own needs, how much output you need, what specifications of wet wipes, and your own financial budget, choose a wet wipe machine that suits you. The application of four-side sealing wet wipes is also very extensive, because it is favored by more customers. , If you need it, please feel free to contact us.
Recommend products
CONTACT US:
If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231
