Causes and Solutions for Copper Wire Recycling Machine Failure

The dry copper wire recycling machine is a professional processing and processing equipment for various waste wire and cable, miscellaneous wires, communication wires, capillary wires, etc., which are not suitable for wire stripping machines. In the process of equipment or after a period of use, there are often problems of one kind or another. The reason for this phenomenon is that there are some problems in the regular inspection and maintenance work. In mechanical equipment, the motor is almost ubiquitous. Of course, the dry copper wire recycling machine is no exception, and the motor is also used.

A motor failure or some problems directly affect production or reduce work efficiency. What problems can occur with the motor of the device during production? How to deal with it? Suny group analyzes the cause of the failure from a technical point of view and makes a simple solution.

Dry copper wire recycling machine failure causes and solutions

Problem 1: The voltage is too low

Solution: Repair the circuit, the cable must meet the requirements, and ensure that the voltage is around 380V.

Question 2: Uneven feeding

Solution: Evenly unloading, the amount should not be too much or too little, too much will block the crushing cavity, too little will waste resources and affect efficiency.

Question 3: Copper wire recycling machine motor and bearing work abnormally

Solution: Stop first. Then, the cause of the abnormal sound of the small copper wire recycling machine motor and the solution to the bearing are repaired and replaced.

Question 4: Lubrication is not in place

Solution: Regularly check the motor, bearing, transmission and other equipment and lubrication of key parts.

Recommend products

>>More

Solar Panel Recycling Plant

Lithium Battery recycling plant

Copper Electrolysis Machine

E Waste Recycling Plant

Large Cable Wire Recycling Machine

Lead Smelting Cupola Furnace