Summary of the main problems of the plane mask machine

Fully Automatic Mask Manufacturing Making Machine

Summary of the main problems of the plane mask machine

1, the line of the nose bridge is scattered when installing

2, the bridge of the nose is blocked

3, there are wrinkles in the bridge of the nose

4, the feeding gantry of the mask cloth is uneven

5, the mask is wrinkled when pressed

6, the mask is deformed after the pressure wheel is pressed after the mask is pressed

7, the mask piece cannot be completely cut off

8, the final pressure wheel adjustment of the main machine

9, abnormal feeding of ear-belt machine-adjustment of feeding rail width

10, Abnormal feeding of earband machine-sensor adjustment

11, the ear strap hanging line problem-pushing the gripper is not in place

12, adjustment of the remote point position of the earphone chain

13, track width and ultrasonic rigid mold position adjustment

14. Adjust the position of the indenter

15, adjustment of ear wire welding quality

16, adjust the position of the zero point of the ear wire holder rotation

17, adjustment of the opening position of the top bar of the ear wire gripper

18. Adjust the position of ear thread scissors

19, the feeding track of the earband machine is abnormal-the feeding track width adjustment

20, the feed track of the earband machine is abnormal-feed sensor adjustment

21, the ear strap hanging line problem-pushing the gripper is not in place

22. Earband hanging line problem-insufficient welding time

23, the ear strap hanging wire problem-the ear wire clamp position is high

24, the ear cord is cut constantly-the ear cord is not on the turntable

25, the ear thread is cut constantly-the ear thread is not clamped by the gripper

26, the ear thread is cut continuously-the cutting edge of the scissors is adjusted

27, poor welding of ear strap-insufficient cylinder pressure

28, how to wear fabric

29, mask wave wheel adjustment

30, Installation and adjustment of mask folding mechanism

31. Adjustment of nose bridge wire feeding and cutting mechanism

32, mask width adjustment

33, adjustment of the main embossing shearing wheel

34, cheap adjustment of the main machine center

35, the feeding gantry of the mask cloth is uneven

36, the mask sticks up behind the welding roller