Radial tire recycling steel wire separation rubber equipment process
Radial tires are a structural form of tires, which are also common in our daily life, different from bias tires, arched tires, pressure-regulated tires, etc. The international code for radial tires is "R", commonly known as "steel tires".
Similarly, a large number of scrapped radial tires are produced every year, and the recycling of these tires is usually divided into the following processes:
1. Wire drawing machine: The steel wire is pulled out from the tire ring so that the tire can be shredded directly by the shredder in the next process.
2. Shredder: The shredder shreds the whole tire after drawing into 3-8 cm rubber blocks.
3. Steel wire separator: The 100mm*100mm rubber block is processed into 10-15mm rubber particles, and the steel wire and the rubber are separated at the same time.
4. Vibrating screen: Sort rubber particles of different sizes, and send the particles that are too large back to the rubber powder machine for secondary pulverization.
5. Magnetic separator: to remove the remaining fine wires.
6. Rubber granulator: The rubber from the steel wire separator can be crushed to a particle size of 1 mm. A finer size is then achieved by particle sifting and recycling. Due to the special design of the granulator, high-quality granules of consistent size can be produced, and during the granulation process, 99% of the fibers are removed.
7. Fiber Separator: Remove foreign matter and fibers.
Through the above treatments, the scrapped radial tires can be effectively recycled and reused, such as steel wires, granular rubber powder, fibers, etc., and then turned waste into treasure. SUNY GROUP has a complete scrap tire recycling production line, which can process all kinds of scrap tires. If you need it, please feel free to consult with us.
Recommend products
CONTACT US:
If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231
