Scrap PCB circuit board recycling production line
With the continuous advancement of science and technology, the development of the electronic technology industry is growing stronger and stronger, and the number of waste circuit boards is gradually increasing. The treatment of circuit boards must meet the requirements of environmental protection. The recycling of waste circuit boards from electronic waste has begun to use physical crushing. The method is to crush the circuit board to recover metal and non-metal.
SUNY GROUP environmental protection circuit board recycling equipment crushing and recycling system includes crusher, pulverizer, analyzer, airflow sorting screen, specific gravity sorting screen, electrostatic sorting machine, and also includes collecting dust removal device, which includes sequentially connected Collector, pulse dust collector and induced draft fan, the collector and pulse dust collector are all equipped with discharge ports; crusher, pulverizer, analyzer, airflow sorting screen, specific gravity sorting screen and electrostatic sorting machine are connected in sequence , the specific gravity sorting screen and the electrostatic sorting machine are equipped with material outlets, the airflow sorting screen, the analyzer and the specific gravity sorting screen are respectively equipped with a second outlet, the second outlet of the airflow sorting screen is connected to the pulverizer, and the analyzer The second outlet of the screen is connected to the collection and dust removal device I, and the second outlet of the specific gravity separation screen is connected to the collection and dust removal device II.
Australia customer PCB recycling equipment site
The outlet of the collector is the fiber powder outlet.
The material outlet on the specific gravity separation screen and the electrostatic separator is a metal outlet.
The electrostatic separator is also equipped with a resin powder outlet.
The analysis machine is connected with the airflow sorting screen through the elevator I, and the elevator I is a bucket elevator.
The specific gravity separation screen is connected with the electrostatic separator through the elevator II, and the elevator II is a bucket elevator.
The induced draft fan is a high pressure induced draft fan.
The crushing and sorting system of SUNY GROUP circuit board recycling equipment has a reasonable structural design. The circuit boards are crushed and pulverized by crushers and pulverizers. After crushing, they are separated by an analysis machine. Under suction, the drainage is transported to the collector and pulse dust collector to avoid the accumulation of powder in the pipeline. The coarser mixture separated by the analyzer enters the airflow sorting screen through the elevator, and the coarser mixture separated by the airflow sorting screen The coarse material enters the pulverizer again for processing, the finer material separated by the airflow sorting screen enters the specific gravity sorting screen for separation, the heavier material enters the electrostatic separator through the elevator to separate the metal and epoxy ester, and the lighter material Under the suction of the high-pressure induced draft fan installed at the end, the fiber powder and dust are separated and recovered through the collector and pulse dust collector. The whole system has a high degree of fineness in material recovery, and the treatment of circuit boards is more thorough, reducing the impact of residues on the environment. Pollution, reasonable structure design, strong practicability.
Recommend products
CONTACT US:
If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231
