Shredders for Solid Waste Treatment
The shredder used for solid waste treatment includes a shredding area. The shredding area is set on both sides of the large motor. The large motor is set under the support table. The support is welded under the rod. The rod is connected with the separation box. Electromagnetic device There is a divider box below. ...
The shredder used for solid waste treatment includes a shredding area. The shredding area is set on both sides of the large motor. The large motor is set under the support table. The support is welded under the rod. The rod is connected with the separation box. Electromagnetic device There is a divider box below.
The bottom of the separation box is welded to the inner side of the plate, and the bottom of one side of the separation box is welded with a sliding plate and a transition plate from left to right. The upper part of the transition plate uses a brush. The upper coil of the brush refers to the bottom of the brush rod, which refers to the electromagnetic The base of the device.
The top of the base refers to the welding on both sides, one side of the base refers to the plug connecting rod of the column, and the other side refers to the mobile platform where the connecting rod is welded. The top of the spring is welded with an electromagnet, and the upper end of the electromagnet is magnetically connected with the iron rod.
The clamping groove and the cross bar are clamped together, the brush bar is welded on the inner wall of the divider, the angle between the bottom plate and the lower sliding plate is an obtuse angle, the transition plate and the bottom plate are parallel, and the upper sliding plate and the lower sliding plate are symmetrically distributed on both sides of the transition plate , place the plate and the bottom plate parallel.
Recommend products
CONTACT US:
If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231
