Mobile:0086-13283840926 E-mail:sunymachine@gmail.com
    


Zhengyang Machinery Alibaba Facebook Twitter Linkedin Youtube

Phone:+86-371-86617456

Mobile:+86-13283840926

Skype:harbin0229

E-mail:sunymachine@gmail.com

Name:
Country:
E-mail:
Tel:
Project:
Time:
IP:
Message:
NewsHome > News >

Welding method of non-woven inner ear mask machine

Time:2020-07-29 10:51 Author:Suny Group

The non-woven inner ear mask machine uses ultrasonic welding. When the mask is moved to the processing position, ultrasonic waves are automatically generated, forming micro-amplitude and high-frequency vibration on the earband, and instantaneously transforming into heat to melt the material to be processed , Make the ear strap permanently stick or embed it on the inside of the mask body after *. It is a processing procedure after the production of the inner ear mask. It requires an operator to place the mask body piece by piece in the mask tray, and the subsequent actions will reach the finished product. Complete automatic operation by the device.

Fully Automatic Mask Making Machine 1+1
Fully Automatic Mask Making Machine 1+1

Non-woven mask machine is a new type of mask machine manufacturing machine. Hot press molding: The mask material (non-woven fabric) is molded with the form of overheating (cup-shaped). Including automatic return action and feeding rack. One piece of four masks is formed at a time.

Slicing: Used to make the outer layer (protective layer) of the cup-shaped mask to make the flower wheel with special alloy steel. The knife edge is *abrasion-resistant and has a long life. The eccentric adjustment is flexible, fast and high. The use of ultrasonic and special *Steel wheel processing, no damage to the edges of cloth, no need to preheat when manufacturing without burrs, and continuous operation.

Edge pressing: Laminate the inside and outside of the mask.

Edge trimming: Use pneumatic punching to cut off the excess edges of the mask.

Bandage type non-woven mask machine

Strap-type non-woven mask machine adopts ultrasonic welding method. A conveyor is set on the machine. The semi-finished mask is fed into the conveying device, which is wrapped by a drawing tube, and then pressed by an ultrasonic flower wheel to cut the strap and output For the finished product, one person needs to place the mask body on the conveyor belt of the machine, and the rest of the subsequent work is completed automatically.

Previous Article:Car tire crusher   
 Next Article:N95 automatic folding mask machine
Tags:

 

CONTACT US:

If you have any requirement or suggestion, please fill in the form and send to us, or contact us by E-mail:sunymachine@gmail.com,thanks!

Name:
Country:
E-mail:
TEL:
Project:
Time:
Message: