Turkey mask machine equipment maintenance instructions

Fully Automatic Mask Manufacturing Making Machine

Repair and maintenance of Turkish mask machine equipment:

1. Check the tension of each unwinding reel in time to meet production requirements.

2. The main components of the mask machinery and equipment should be checked regularly, and lubricating oil should be added when necessary to ensure normal operation.

3. The pressure of the cutter should be appropriate, otherwise it is easy to hit the knife.

4. Regularly check the wear and tear of the welding, you need to adjust the pressure appropriately, and reduce the pressure to a lower level while ensuring the welding, and you must pay attention to maintaining the equipment.

Note for Turkish customers when using mask machinery and equipment:

1. The pressure of each component should be adjusted appropriately to reduce the load of the whole machine.

2. When the mask machine is turned on, the raw materials should be manually pulled into the welding mold first, so that the equipment can perform normal production.

3. All bearings should be checked regularly to ensure normal operation during work.

4. Before turning on the mask machinery and equipment, the ultrasonic welding machine needs to be turned on first, in order to avoid excessive load and burn out the ultrasonic welding machine.

Recommend products

>>More

Solar Panel Recycling Plant

Lithium Battery recycling plant

Copper Electrolysis Machine

E Waste Recycling Plant

Large Cable Wire Recycling Machine

Lead Smelting Cupola Furnace