Name:
Country:
E-mail:
Tel:
Project:
Time:
IP:
Message:
NewsHome > News >

Copper and aluminum radiator recycling production line

Time:2021-04-26 10:29 Author:Suny Group

As the recycling industry becomes more and more standardized, the recycling of various materials is also being updated. How to deal with the copper and aluminum in the waste radiator? The main method currently used is to crush, separate and separate through the copper and aluminum radiator recycling production line. The effect reaches 99%, which is the current mainstream recycling method. The waste radiator crushing and sorting equipment can be used to test the copper and aluminum materials of the waste radiator, the internal copper and aluminum of the waste water tank, and the motor rotor. With more and more electronic products, the demand for copper and aluminum is also increasing, and the recovery of copper and aluminum materials from waste copper and aluminum materials is simpler than that of ore and has a higher content. Investment prospects, if you are interested, please contact us.

Waste Radiator Recycling Equipment

Recycling and recycling of copper and aluminum water tanks, air-conditioning radiators and other copper-aluminum composite materials. In the past, the efficiency of dismantling equipment was low. With the increase in market demand and labor costs, copper and aluminum water tanks can be recycled and processed in large quantities. The copper and aluminum water tank crushing and sorting equipment came into being. It uses automated production lines for production and processing. The small crushing and separation production line can process 2 tons of scrap copper and aluminum water tanks in an hour. The production cost is greatly reduced, and it is more and more favored by customers at home and abroad. , Welcome to visit the site and test the machine.

For raw materials such as copper and aluminum water tanks, the high content of copper in them has great value for use. For its recycling, crushing and sorting is an ideal choice for large-volume customers. The copper-aluminum water tank crushing and sorting machine production line uses mechanical crushing and air-flow separation to separate copper and aluminum. The effect is good, the separation rate is high, and the labor is greatly reduced. It is an ideal equipment for recycling and processing of automobile copper and aluminum water tanks. Lvjie Environmental Protection is a professional manufacturer of copper-aluminum water tanks, air-conditioning radiators and other copper-aluminum composite materials crushing and sorting equipment. On-site test machine, provides copper-aluminum water tank crushing and sorting machine pictures, videos and other materials to help customers deal with cars through recycling Materials such as copper and aluminum water tanks make money and become rich.

Daily maintenance of copper and aluminum water tank crushing separator:

1 In addition to checking the fastening and loosening of each part, you should also pay attention to checking the wear of the wearing parts. If the wear is serious, replace it in time to avoid damage to the main components. And take necessary fire prevention measures.

2 In the production of large copper and aluminum water tank crushers, uniform feeding should be maintained to ensure the crushing quality and normal production. At the same time, it is strictly forbidden to overload the motor to ensure the normal operation of the machine.

3 Before starting the test run, strictly check whether the installation of each part of the large copper-aluminum water tank crusher meets the requirements, whether the screws and bolts are loose, you can gently pull the belt with your hands to try it, and whether there is any phenomenon such as shell collision. At the same time, check the direction of rotation, and it is strictly forbidden to crush flammable and explosive materials to avoid accidents.

4 Due to the high speed, in addition to the correct and firm installation, good lubrication should be maintained at the same time to maintain the normal operation of the machine. Under normal circumstances, it is normal that the bearing temperature does not exceed 70 degrees. Add butter and molybdenum disulfide to the bearing of the main engine once a week, and the effect of high-speed butter is good.

Tags:

 

CONTACT US:

If you have any requirement or suggestion, please fill in the form and send to us, or contact us by E-mail:sunymachine@gmail.com,thanks!

Name:
Country:
E-mail:
TEL:
Project:
Time:
Message: