Debugging method of high-speed plane one-to-one mask machine

The width and thickness of meltblown fabrics and non-woven fabrics will directly affect the normal use of mechanical equipment. In the actual production process, the width and thickness of the cloth may exceed the forming range of the machine in the plastic processing process, and many problems will be encountered in the production process of the nose bridge band. When you encounter a problem, you will lose a lot of time, energy and materials during the debugging process, which is very scary.

If the material band is not well formed, it may cause the mask to not fold smoothly, the nose clip line is stacked, the compression welding of the body does not fit, or the welding effect of the sealing edge is not perfect, which is also a common phenomenon in the production of masks.

The width, thickness and flexibility of the nose bridge will affect the debugging of the flat face mask machine. If the nose bridge is not good, the packaging is not smooth; in addition, if the nose bridge is too thick, it will not only break the blade, but also cause the cutting to be uncontinuous, or the cutting angle is not good, resulting in the accumulation or dislocation of the nose bridge. Our machine requires that the bridge of the nose bridge must be centered in the middle.

The elasticity, thickness and flat belt of the ear strap tension greatly interfere with the good speed in the actual production process. For experienced automation engineers, adjusting the earband welding machine is not difficult. If you understand it, you will know the actual structure of the action. In fact, in actual production, there will also be various small problems, such as inability to open the wire, cutting the wire, welding failure, offset welding, unqualified penetration, etc., resulting in the production of a large number of defective products. At this time, it is necessary to deal with many Commissioning and maintenance are carried out. Whether it is a linear drawstring, a reciprocating drawstring or a rotary drawstring, each has its own characteristics. In terms of efficiency, the draw belt is higher than the rotating belt.

Recommend products

>>More

Solar Panel Recycling Plant

Lithium Battery recycling plant

Copper Electrolysis Machine

E Waste Recycling Plant

Large Cable Wire Recycling Machine

Lead Smelting Cupola Furnace