How to maintain the folding mask machine
In modern society, due to the continuous deterioration of the natural environment and the enhancement of our protective awareness, the market demand for disposable medical masks and protective masks is constantly expanding. Many customers are keenly aware of this business opportunity and want to enter the work of mask production. However, in view of the unfamiliarity with the mask production process, the purchase of mask raw materials, the selection of mask machine manufacturers, the plan of the mask production workshop, the working specifications of the mask production, etc., so when inquiring and consulting relevant information and doing calculations It seemed blind and reckless.
During the production of masks by the folding mask machine, the maintenance of the mask machine is very important. The maintenance of the mask machine can not only delay the reduction of the accuracy of the mask machine, but also reduce the probability of repairing the mask machine equipment.
1. Appearance: The mask machine is what we use to wear on the face, and some even enter the operating room. Fold the mask machine, so the production of the mask must be asked to clean the mask machine every day. You can arrange personnel to clean the work surface of the equipment and the dishes holding the masks after turning off the power every day. Be careful not to use water, oil, and other non-toxic and volatile cleaning fluids such as alcohol.
2. Ultrasonic system: (consisting of ultrasonic electric box, ultrasonic transducer, welding head and connecting wire) Check whether the ultrasonic system is clean, especially ultrasonic electric box, ultrasonic transducer (vibrator), welding head (mold) It is necessary to clean monotonously without water, is the connection line strong? Often check the degree of wear of the ultrasonic welding head (mold) of the folding mask machine. Check carefully whether the pointers of the voltmeter and ammeter on the ultrasonic electric box are normal.
3. Transmission system:
The transmission system of the folding mask machine includes motors, gears, reducers, sprockets, chains, conveyor belts and other components. Check whether there is dust on the surface of the motor that affects heat dissipation. Whether the gears and sprockets are oiled or attached. Is the chain tightness suitable for foreign matter? Is the connecting screw of each transmission loose? Is the lubricating oil of the reducer enough? Usually the oil needs to be replaced every 1000 hours to 1500 hours.
4. Electrical system:
Fold the mask machine to check whether the circuit connector of the mask machine is loose, whether the main power cord and branch signal line are worn? Aging? Loose? Is the electric box clean and monotonous, is the exhaust fan working normally?
Five: Pneumatic system: (consisting of air source filter system, air pipe, cylinder) Is there water in the air filter check? (Air compressor water: the area with high humidity should be drained to the air compressor every day). Check the air pipe for air leaks? Cylinder air leaks? Cylinder magnetic anti-inductor orientation and work is normal.
Others: The equipment must not be exposed to corrosive liquids and objects, for example: sweat is very simple and rusts the equipment parts. If the equipment is not used for a long time, apply anti-rust oil to the transmission system and rusty parts of the mask machine.
The mask manufacturer requested the maintenance of the folding mask machine equipment according to the above requirements. Not only can the number of repairs of the mask machine be reduced, but also the working life of the imported mask machine can be supplied to the company's production power.
Recommend products
CONTACT US:
If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231
